Finite Element Composite Materials

Hard Metal

FEA Based Composite Material Design and Optimization: Fatigue, Fracture, Impact, Crash, Acoustics and Vibration with Abaqus, Ansys and LS-DYNA

Discuss this capability Read the brief

Hard Metal — Finite Element Composite Materials

Hard metals, also known as cemented carbides, are composite materials that are made up of a metal matrix and a hard ceramic phase. The metal matrix typically consists of cobalt, nickel, or iron, while the hard ceramic phase is composed of tungsten carbide, titanium carbide, or tantalum carbide.

The microstructure of hard metals is critical to their mechanical properties, as it determines the distribution and size of the hard ceramic inclusions within the metal matrix. By varying the content and microstructure of the hard inclusion phase, it is possible to tune the material properties of the hard metal, including its hardness, strength, and wear resistance.

One key challenge in optimizing the microstructure of hard metals is managing the stresses that are generated during the manufacturing process. These stresses can lead to cracking or deformation of the material, which can affect its mechanical properties and overall performance. To mitigate these stresses, it is important to carefully control the manufacturing process, including the composition of the metal matrix and the processing conditions, such as temperature, pressure, and cooling rate.

Talk to an engineer All of Composite Materials

The wider discipline

Composite Materials

Composite material modeling Consultant, Training and Simulation services of OLTRION cover wide range of industry using advanced FEA Technology for design, ultimate failure, fatigue, fracture, impact, crash, environmental degradation, acoustics and multiphysics simulations with sophisticated FEA solvers such as Abaqus, Ansys, LS-DYNA, RADIOSS and COMSOL.

Open the section overview

Composite Materials

More in Composite Materials

Capabilities that sit beside this one

View the section →

Plastic materials Designing plastic materials reinforced with glass and/or carbon fibers is a complex process that requires consideration of many factors, including the properties … Open capability

Rubber Matrix Composite Rubber-based components, such as tires, anti-vibration systems, seals, and hoses, rely on the properties of the rubber matrix to perform their intended … Open capability

Unidirectional composites (UD) Unidirectional composites (UD) are a type of composite material that consist of fibers arranged in a single direction within a matrix material. … Open capability

Woven fabric composites Advanced FEA tools are essential for material investigations and are used to simulate the behavior of materials under various loading conditions. An … Open capability

Composite modeling approach in numerical computation Key composite modeling approaches: ▶ Cohesive zone models (CZMs): CZMs are commonly used to model the initiation and propagation of cracks and … Open capability

High-rate loading conditions: Impact, Crash, Blast and Explosion Composite materials can exhibit complex behavior under high-rate loading conditions, including fracture, damage, and delamination. High-rate loading conditions refer to situations where … Open capability

Braided Composites Braided composites are a type of composite material that is made by braiding continuous fibers around a mandrel to create a preform, … Open capability

Discontinuous Fiber Composites Discontinuous fiber composites (DFC) are a type of composite material that are made by compressing pre-impregnated fiber chips, or prepreg chips, which … Open capability

Across Finite Element

Other Simulation Area

Acoustics and Vibration Shipbuilding Noise Engineering Accurate noise prediction models are crucial for designing marine applications that meet customer expectations for on-board noise levels. … Open capability Additive Manufacturing Powder Bed Fusion Powder Bed Fusion (PBF) is an additive manufacturing technique that uses a heat source, typically a laser or … Open capability Blast, Explosion & Fire Arbitrary Lagrangian-Eulerian (ALE) The Arbitrary Lagrangian-Eulerian (ALE) method is a numerical technique that combines the advantages of both the Lagrangian and … Open capability Crash Test Simulation Small Overlap - Oblique Crash Test FEA Simulation The small overlap or oblique crash test is a type of crash test that is designed to simulate … Open capability Durability & Fatigue Life Vibration Fatigue Simulation structural vibration can lead to various issues in products, such as fatigue and durability problems, adverse reactions to … Open capability Metal Forming Simulation Sheet Metal Forming Advanced finite element analysis (FEA) tools such as Ansys, LS-Dyna and Abaqus can be used for sheet metal … Open capability Multibody Dynamics Vehicle MultiBody Dynamics Simulation: Car Ride, Driveline, Engine and Tire MBD Multi-body dynamic (MBD) simulation is a powerful tool for analyzing and optimizing the performance of different subsystems within … Open capability Thermal Analysis Stress Relief Heat Treatment Stress relieving is a heat treatment process that reduces residual stresses in an assembly after welding. This process … Open capability Welding Simulation Resistance Spot Welding Resistance Spot Welding (RSW) is a pressure welding process used to join two metal sheets together. In RSW, … Open capability VTOL, eVTOL & UAM NVH Analysis for eVTOL & Electro-Motors FEA-based simulation in electromagnetic multiphysics environments delivers critical insights for Noise, Vibration & Harshness (NVH) analysis of electrical … Open capability

Working on hard metal?

Tell us the geometry, the physics and the decision it has to support.

Talk to an engineer