No pages match that search.
Tag
Every article tagged “Validation”.
67 articles
How dust explosion venting is sized, where the correlations reach their limits, and what a validated CFD and FEA workflow adds: vent duct and panel effects, thrust on the supports, and surrogate-assisted screening of vent designs.
How vapour cloud explosion simulation works for onshore and offshore process areas: congestion and confinement, CFD pressure fields, exceedance curves and design accidental loads, mapping loads onto a structural FE model, and where surrogates help.
A blast resistant design procedure for buildings and process modules: load definition, SDOF versus finite element response, response limits and protection levels, progressive collapse, where AI helps, and the validation record.
How ALE blast simulation works for air blast on structures: JWL explosive and Eulerian air, Lagrangian coupling and its leakage, cell size scaled with charge mass, mapping 1D or 2D runs into 3D, a decision table against empirical loads, SPH and CFD, and surrogate-assisted sensitivity.
How Hybrid III, THOR and WorldSID finite element dummy models are validated, what rating programmes say about virtual evidence, where human body models fit beside dummies, and where machine learning helps and does not.
How to simulate the small overlap and oblique frontal crash tests: what the IIHS, NHTSA and Euro NCAP texts specify, why the wheel and pillar load paths decide the result, where models break, and how surrogates support structure optimisation.
How airbag deployment simulation handles folding, inflator gas, fabric porosity and vents; when uniform pressure, ALE or particle gas models fit; how out-of-position cases set the method; and where machine learning helps calibration and design sweeps.
How school bus roof, body joint and seat strength are specified in FMVSS 220, 221 and 222, why bus rollover simulation differs from a car crash model, how joint and seat models are calibrated, and where machine learning helps.
How occupant restraint system tuning trades head, chest and knee loads, what FMVSS 208 sets for a belted Hybrid III test, how to validate a restraint model beyond one sled test, and where surrogate-assisted robust optimisation helps.
Have a model that will not converge?
Send the geometry, the physics and the decision it has to support. We answer with an approach, not a sales call.
